Start by spraying the tracks of the wheels for the garage door with the oil.
How to grease garage door rollers.
Step 1 lubricate tracks.
Open your door and spray the lubricant on each of the hinges.
Purchase a lithium based grease or garage door lube.
While metal rollers require less precision it s a good idea to protect your floor and your car from any drips along the way.
The metal shaft that slides in the bracket on the door itself and the ball bearings on the roller wheel.
Garage door maintenance is essential to.
Whether you raise and lower your garage door manually or you have an electric door opener regular attention to the rollers and tracks keeps the door.
X expert source barry.
Wipe off the drippy garage door lube excess.
Once the track is dry spray the oil along the track from the top to the bottom.
There s two parts to lubricating the garage door rollers.
Grease would attract dirt which can cake up and harden causing future problems.
This is one of the most important parts of a garage door to lubricate because lubricating the springs.
Metal rollers are how your garage door travels up and down.
Slowly lift your garage door up manually and spray each.
How to maintain garage door rollers tracks.
Then slip a piece of cardboard behind the torsion springs and soak them with garage door spring lubricant too.
Instead you want to clean the tracks.
Locate the torsion springs that lift and lower your garage door.
If your rollers feature nylon wheels be sure to lubricate the rollers without getting any lubricant on the nylon material.
Take a damp rag and wipe the tracks clean.
Lubricating the moving parts 1.
The metal tracks that your garage door runs along should not be greased.
A quick and easy step by step tutorial on how to properly lubricate a garage door.
To lubricate the metal shaft spray some grease at the edge of both sides of the bracket as shown below.
Spray the roller shafts and hinges first with garage door lube.
Spray individual wheels with the oil as well.