Use a toggle bolt for heavier pictures or mirrors.
How to hang up a mirror on the wall without nails.
Start by preparing the wall by wiping it with a damp cloth.
Take a roll of fix pro extreme mounting tape.
This ensures the strips attach securely to the wall.
You need to make sure that the screws or nails you hang your mirror from are driven directly into the studs.
Remove the remaining liners on the double sided tape.
Then align your mirror exactly where you want it and then press the frame to the wall firmly.
First remove the liner on the outside of the strips to reveal the adhesive.
Press the strips on the wall firmly and wait one hour before hanging the frame back up.
Hang using picture wire hold the mirror against the wall at the desired position.
Slowly separate the strips on the picture from those on the wall by gently pulling on the bottom corners of the picture and lifting.
Then press the picture against the wall.
Stick the mirror to the wall.
Hanging a mirror with strong adhesive tape instead of nails or screws is the quickest and easiest way to do it.
Designed for hanging heavy pictures and mirrors these large picture hanging strips can hold up to 16lbs per pack.
Rub the pads for 30 seconds and then wait one hour to allow the adhesive to bond with the wall and the picture frame.
And it only takes a few simple steps.
With your fingers press the strips against the wall for 30 seconds.
Hold the mirror in place for 30 seconds before removing pressure.
Hang a mirror using cleats step 1 you can also use metal cleats to hang mirrors with sturdy frames.
Use a stud finder to mark the edges of studs on the wall.
Set the mirror down.
Drill a hole and push in the bolt with toggle attached.
Mark the location of the top edge and the center of the frame.
Put the frame and strips on the wall.
The toggle will open up behind the plaster or drywall like butterfly wings and when you.
Finding studs is a very important part of hanging a mirror.
Just follow the package directions.
Peel the frame off the strips that are attached to the wall so the frame comes free but the strips stay on the wall.