To screw into brick there are only two things you need.
How to hang stuff on concrete walls.
If you are hanging a shelving bracket place the bracket between the anchor and the screw and then drill the screw into place.
Using a screwdriver or the screw bit on your drill screw the screw into place in the anchor leaving a bit coming out of the wall so you have a surface on which to hang your photo.
Peel the exposed protective backing off the stiff portion of the hook and loop tape.
These are the four methods i found and tested.
While most adhesive hooks are strong enough to keep your pictures on the wall you must buy a couple capable of holding about 8 pounds or 3 6kg of weight.
The adhesive hooks are an outstanding solution because they don t require we drill holes in the wall.
How can you attach something to a brick wall without a drill.
The pins are so small you don t see the holes when you remove them but they are strong enough to hold and stay in the wall.
To use drill a hole in the.
Adhesive wall hooks if the concrete block wall is painted and has a relatively smooth not porous finish hanging pictures may be as simple as installing removable adhesive wall hooks.
Mark the spot on the wall where you want the hanger to be placed.
If the item you are hanging has a wire hanger in the back be sure to consider the slack when determining where you want it to hang.
The anchor screw looks like a regular screw and it is but it also has an extra set of raised threads that help it cut and grip into very hard material like brick or concrete.
Measure from the bottom of the object to where the wire catches.
Double sided tape can be used to hold items on a brick wall.
Test this by pulling the center of the wire tight toward the top of your object.
Brick clips that grip onto the brick will secure items onto a brick wall.
They can be installed in drywall or hollow concrete blocks and cost just over a buck a piece.
Attach the stiff part of the hook and loop tape combo to the side you already attached to the item you will hang on the wall the hooks portion affixing to the loops portion.
You hammer the hanger into the wall and it puts 4 small pins into the wall that are holding a plastic hook.
Brick clips that hold in the mortar space between the bricks.
Instead they have adhesive backings which can stick firmly to the wall.
Anchor screws walldog tapcon concrete screw or screw anchor and a masonry drill bit.