You don t need to replace your garage door or door opener with a quieter model just do a little maintenance.
How to make a garage door opener quieter.
Doing these every year will help prolong the life of your garage door.
Be careful of choosing the big box store consumer type.
Bushings stop vibration transfer http amzn to 2f48epr replace any metal rollers with nylon http amzn to 2wotpk1 lithium grease http amzn to 2woykjs.
Belt drive garage door openers are quieter than both chain and screw drive type openers.
Occasionally the noise is coming from the garage door opener itself.
Unless you have a heavy wood or wood overlay door requiring a heavy duty type of garage door opener a belt drive is an affordable effective option to make your garage door quieter and more reliable.
Make sure everything is snug.
Automatic garage door openers make driving your car into your garage a much simpler job.
However not all garage door openers are created equal particularly when it comes to noise levels.
The first step in quieting your garage door is to tighten the nuts and bolts on the door and track.
Snug up all the nuts and bolts on your garage door track and check for worn parts and replace where needed.
Set wood block on top of ladder.
Set motor on top of wood blocks.
Be careful not to over tighten.
Sometimes the noise isn t coming from the rollers hinges or springs.
5 place rubber pad behind mounting bracket and reattach it to the wall.
2 place stepladder under garage door opener motor.
1 unplug the motor of the garage door opener.
They also cost more roughly 60 for a full set of nylon rollers versus 38 for metal.
3 unbolt and lower motor from mounting straps.
Consider using nylon rather than metal rollers as they are quieter and don t have to be lubricated on a regular basis.
A typical five section garage door will require a dozen rollers.
If you have a chain or belt driven garage door opener a loose garage door could be the cause of the noise.
4 disconnect door track mounting bracket from wall.
Noisy garage doors are usually caused by worn rollers loose hardware parts that need lubrication or an opener in need of anti vibration pads all simple fixes.
Use a quiet garage door opener.
Garage door opener maintenance.